HARDWARE & NETWORK

Sunday, September 14, 2008

Install a Monitor

To install a monitor:

  • Turn off the computer.
  • Locate the monitor port on the computer
  • 15-pin VGA adaptar.
  • Align the pins on the monitor cable with the holes in the adapter port and plug in the monitor.
  • Secure the monitor to the port by tightening the screws on each side of the port.
  • Plug in the monitor power cord.
  • Turn on the computer.
  • Turn on the monitor.
  • Verify that the monitor works,
*Check the power light is on, that is green,that it is not blinking.

*Make sure the colors display correctly .

*Make sure there are no lines in the image displayed on the monitor.

*There should be no waviness to the display.